features rugged industrial case with handle easy-to-read lcd display, simple operation high accuracy peak reading circuit wide 10-1000 v test range precise auto-sensing shutoff built-in 5-pin socket for in-line resistance measurement applications suitable for testing: gas tubes carbon gaps movs zener and avalanche diodes thyristor devices finished surge protection products 4030-0x - surge protector test set speci cations are subject to change without notice. customers should verify actual device performance in their speci c applications. bourns model 4030-0x surge protector test set is a handheld, battery-operated tester designed to measure the clamping voltage and dc breakdown voltage of most surge protective devices. the model 4030-0x is suitable for testing gas tubes, carbon gaps, mo vs, zener and avalanche diodes and thyristor devices, both as components and as complete protectors. the model 4030-0x is a true slow-rise tester because it does not use a pulse transformer. it contains unique test circuitry and a precise 1 ma detector. as soon as 1 ma is conducted through clamping type devices such as movs and avalanche diodes, the control circui t removes the test voltage from the output terminals and displays the clamping voltage on the meter. a low energy capacitive circ uit will discharge through crowbar type protectors such as gas tubes and carbon blocks, and trigger the detector. the breakdown voltage will be displayed and the test voltage removed. speci cations open circuit voltage rate of rise ............................................................................................. ............ 200 v/s or 1000 v/s maximum tested output voltage ........................................................................................................... 1000 v useable measuring range ....................................................................................................... ............. 10-1000 v test current for clamping devices ............................................................................................. ........... 1 ma ?0 % test current for crowbar devices .............................................................................................. ........... >1 a in-line resistance measurement 1 ........................................................................................................ <150 ohms (open is >150 ohms) operating temperature .......................................................................................................................... 0 to +50 ? storage temperature ........................................................................................................... .................. -10 to +60 ? measurement accuracy .......................................................................................................... ............... 0.5 % power source .................................................................................................................. ...................... 2 alkaline batteries - nema type 1604a battery life (based on usable reading up to 750 v) alkaline ..................................................................................................................... ....................... >1,500 tests lithium .................................................................................................................. ........................... >3,000 tests shipping weight ............................................................................................................... ..................... 3 lbs. warranty ...................................................................................................................... .......................... 2 years notes: ? for p-type thyristor protectors, breakdown voltage v bo occurs at the device zener voltage v z . therefore, the tester will measure actual v bo . ? for n-type thyristor protectors, breakover voltage v bo is higher than the zener voltage v z . for these devices, the tester will measure v z . 1 available only when using the 5-pin socket, tip in to tip out , ring in to ring out. description internal switches for ramp speed circuit types are accessed by removing the back cover. they are to be set for the intended application: 200 v/s for laboratory tests or qc type approvals; 1000 v/s for high-speed testing or sorting. (factory default is 1000 v/s.) pushing the test button applies a linear ramp to the device under test. sensing circuitry automatically terminates the test whe n either the dc breakdown or 1 ma clamping voltage is reached. the test value is maintained on the lcd display until the test button is released. operation
product dimensions (approximate, rounded up to the nearest 0.1 inch) additional features individual buttons for complete testing between all terminals and polarities linear voltage ramp, selectable for 200 v/s or 1000 v/s operation wide range of adapters for standard protector types how to order 4030 - 0x - y model number designator tester con guration 01 = standard tester with 800 v (1000 v max.) 02 = low voltage tester with 200 v (250 v max.) mounting con guration (blank) = portable w = wall mount / frame mount) note: uses two 9 v nema type 1604a alkaline batteries. lithium batteries may be used for longer test life. due to shipping regulations, factory may not install lithium batteries. please see the manual for battery installation instr uctions. part no. accessories included 4030-01 ................2 each p/n 30503-03 / 1 each p/n 30503-04 4030-01-w ............wall mount (din-rail type) / 1 each p/n 50502-01 part no. available separately 30503-01 ..............test cable w/alligator clip ?48-inch - red 30503-02 ..............test cable w/alligator clip ?48-inch -black 30503-03 ..............test cable w/alligator clip ?24-inch - red 30503-04 ..............test cable w/alligator clip ?24-inch - black 50502-01 ..............120 vac to 18 vdc adapter 72288....................adapter for 2-pole gas tubes, fits 6 and 8 mm diameter gas tubes and most carbon block protectors 72289....................adapter for 3-pole gas tubes with leads on 4.4, 4.7 and 6.4 mm centers 72292....................1-pin to 5-pin adapter 72293....................4-pin to 5-pin adapter width .............................................. 8.25 length............................................. 6.50 depth .............................................. 3.50 depth with lid open ....................... 9.25 danger! high v o ltage warning do not connect to energized equipm ent surge protector test set model 4030-01 peak voltage ser ies resistance in ohms (open is > 150 o h ms) me asurem ent only ava ila ble through the 5- p in sock e t l1-c + l1-c - l1-c + l1-c - l 1-l 2 - l1 -l2 + t i p ring l1 c t i p r i n g l2 rev. a 01/13 speci cations are subject to change without notice. customers should verify actual device performance in their speci c applications. 4030-0x - surge protector test set
|
